How could I bind my project or put it together?

Question: How could I bind my project or put it together!?

My project paper is 9 X 22 the folders I have to put it together is 8 1/2 by 11 what could i do or use!?Www@QuestionHome@Com

Best Answer - Chosen by Asker:

Find a piece of card board and cut 2 sections about an inch bigger than your project paper, on all sides!. so you would cut 10x23 inches!. use hole punch and punch holes on the left side, if you have like some sort of wrapping paper with a pretty design in it or wall paper, cut it, leaving enough paper to fold to inside of flap approx!. 2 inches!. apply this to card board, front and back section, then with a ribbon or stout string, weave a binding through the holes you punched in the card board, only down fall to this is you will need to punch holes in your work, or secure all sides of binder with ribbon, to hold your work in binder without punching holes in your work!. Hope this helped!.Www@QuestionHome@Com