Question Home

Position:Home>Visual Arts> How are photos developed from a normal film camera?


Question: How are photos developed from a normal film camera!?
Best Answer - Chosen by Asker:
It's a two step process!. First, obviously is to develop the film!. Then once the film is developed, you would either use an enlarger to develop prints if you're using a traditional darkroom, or you would scan the negatives directly!.

Developing black and white film is fairly easy and simple!. First, the film is loaded onto a reel and then placed in a small lightproof tank!. This has to be done in total darkness, so you would either load it in a darkroom, or in a "changing bag!." A changing bag is a lightproof zippered bag that has holes from your arms!. Once you load the film onto the reel and put it in the developing tank, it's protected from light and you can do the rest in normal light!.

The next step is to pour in the developing chemical!. When film is exposed to light, it is chemically changed at the molecular level!. A latent image is formed on the film, but it's invisible!. The developing chemical develops the image!. You leave the developer chemical in the tank for a certain period of time, depending on what kind of film you're using!. Usually it's between 5-8 minutes!. You also "agitate" the developer by gently inverting or turning the tank every minute or so!. This helps to develop the film evenly!.

Once the developing time is up, you pour out the developer, and then rinse the film!.!.!.you leave the tank closed, but just run water through the spout!. Then the next step is to put in the fixer!. The fixer is another chemical that stabalizes the film so that the images are permanent, and it is no longer light sensitive!. You follow the same process, pour in the fixer, and then leave it in the tank for several minutes!. I usually leave it in for 9 minutes!. Gently invert the tank every minute or two minutes!. Pour out the fixer and thoroughly rinse the tank with water!.

Then you can open the tank and the film is developed!. Permanent images are formed on the film!. And that's basically all there is to it!.

It's also good to rinse the film one last time in distilled water, just to prevent water spots from forming on the negatives!.

Once the film is developed and dry, you can either put the negatives on an enlarger and develop prints or scan the negatives!. I use an enlarger!. The enlarger projects image onto photo paper!. Photo paper (real photographic paper, not printer paper) is light sensitive, so you develop it just like film!.

But basically, developing film is just using chemicals to develop the latent image that was formed on the film when you took the picture!.!.!.and then using the fixer to stabalize it and wash away silver halides that were not exposed!. It's actually pretty cool when you think about it!. How light chemically changes film!.Www@QuestionHome@Com

The film is put in developer, stop bath, fixer, then a rinsing agent!. (all of this is done where there is absolutly no light)!. After it has dried, light is shown through the film and onto light sensitive paper!. The paper goes through the same baths as the film (slightly different chemicals though) and then dried!. This is an incredibly simplified version of it!. The process could take a while if you are doing it in a darkroom!.Www@QuestionHome@Com

u put the film into chemicals which develops it and makes an image appear on the negative, then u shine light through the negative onto photo paper using an enlarger, then u develop the photo paper with chemicals!.Www@QuestionHome@Com