Can i put a 7200 Kahler bridge on my bc rich warlock bronse?

Question:If so is it hard? also the locking nut how much for it all as well as putting it on?

Best Answer - Chosen by Asker: If so is it hard? also the locking nut how much for it all as well as putting it on?

Dude,originally the bc rich guitars came standard with kahler trems,but then got changed to either the stop tail piece r floyd roses.so yes you can put a kahler on any solid body guitar.but if it had a stop tailpiece then it will require routing,which should b done by a professional,if at least to get some insurance on the installation.If you have the floyd rose on it already then you shouldnt have a prob with the lock nut,but still may have some body routing to do.if you have the $ and time I would definetly install a kahler on ur bc rich as,In my humble opinon there is no better tremolo system,Lots of luck and ROCK ON.

oh yeah,a standard floyd rose goes for about $400,I would spend $600 on aKahler installed and b happy.The lock nut will cost about $15 and would be included in the installation,You do need to have a tech do it though,good luck

Kahler is ok for the Bc Rcih.
I personally would install a Flord Rose Pro instead. It is patented with a double lock, top nut and on bridge. Perfect tuning.

In either case, you will have to re-adjust the harmonics since you are changing the length of the tuning and harnonics will be off for sure.

Measure the top nut to approx where the bridge will sit . Measure as close as possible since their is not that much play to adjust the harmonics.

The dead center is the 12th fret . The top nut up to the 12th fret should measure exactly as that of the 12th fret and the bridge where the string will rest.